Engineering & Materials
Heat transfer, HVAC, stress and strain, fluid flow, viscosity, wire and sheet gauges, thread pitch and hardness scales.
Heat & HVAC
10 converters
BTU/h to Tons of Cooling
Convert BTU per hour to tons of cooling (refrigeration tons) and kW, with MBH and kcal/h.
Tons of Cooling to kW
Convert tons of cooling (refrigeration tons) to kilowatts, BTU per hour, MBH and kcal/h.
COP to EER
Convert between COP, EER and electrical kW per ton of cooling for air conditioners and chillers.
R-Value to U-Value
Convert R-value, RSI and U-value between US and SI units for insulation and building elements.
Thermal Conductivity
Convert thermal conductivity between W/(m·K), BTU·in/(h·ft²·°F), BTU/(h·ft·°F), cal and kcal units.
Thermal Resistance
Convert overall thermal resistance between K/W, K/kW, K/mW and °F·h/BTU.
Heat Transfer Coefficient
Convert heat transfer coefficients and U-values between W/(m²·K), BTU/(h·ft²·°F), cal and kcal units.
Heat Flux
Convert heat flux between W/m², kW/m², W/cm², BTU/(h·ft²), cal and kcal units.
Specific Heat Capacity
Convert specific heat capacity between J/(kg·K), kJ/(kg·K), cal/(g·K), kcal/(kg·K) and BTU/(lb·°F).
Temperature Gradient
Convert temperature gradients between K/m, K/km, K/cm, K/mm, °F/ft and °F/in.
Mechanics & structures
6 converters
Stress
Convert stress between Pa, kPa, MPa, GPa, psi, ksi, kgf/cm² and lbf/ft².
Strain
Convert strain between ratio, percent, per mille, mm/m and microstrain.
Young's Modulus
Convert Young's modulus (elastic modulus) between GPa, MPa, Pa, ksi, Msi, psi and kgf/mm².
Moment of Inertia
Convert the second moment of area (length⁴) or the mass moment of inertia (mass × length²) between SI and US units.
Section Modulus
Convert section modulus between m³, cm³, mm³, in³ and ft³.
Surface Tension
Convert surface tension between N/m, mN/m, dyn/cm, gf/cm, kgf/m, lbf/ft and lbf/in.
Fluids & flow
12 converters
Dynamic Viscosity
Convert dynamic viscosity units with clear definitions and instant results.
Kinematic Viscosity
Convert kinematic viscosity units with clear definitions and instant results.
Specific Volume
Convert specific volume (volume per mass) between m³/kg, L/kg, cm³/g, ft³/lb, in³/lb and gal/lb.
Mass Flux
Convert mass flux (mass flow rate per area) between kg/(m²·s), g/(cm²·s), kg/(m²·h) and lb/(ft²·h).
Volumetric Flux
Convert volumetric flux (volume flow per area, or Darcy velocity) between m/s, m/h, m/day, ft/s, gpm/ft² and L/(m²·h).
Flow Velocity to Flow Rate
Convert flow velocity to volumetric flow rate through a pipe, or flow rate to velocity, in L/s, m³/h and gpm.
Pressure Gradient
Convert pressure gradients between Pa/m, kPa/m, MPa/m, bar/m, psi/ft and psi/in.
Hydraulic Power
Calculate hydraulic power and shaft power from flow rate, head or pressure, and pump efficiency.
Hydraulic Conductivity
Convert hydraulic conductivity between m/s, cm/s, m/day, ft/day, in/h and US gpd/ft².
Permeability
Convert intrinsic permeability between m², cm², µm², darcy, millidarcy, ft² and in².
Reynolds Number
Calculate the Reynolds number and pipe-flow regime from velocity, diameter, density and viscosity.
Water Column to Pressure
Convert a height of water column to pressure in Pa, kPa, psi and bar, or pressure to water height, with a reference density.
Materials & gauges
5 converters
AWG Wire Gauge to mm Converter
Convert American Wire Gauge sizes to nominal bare conductor diameter in millimeters and inches.
Sheet Metal Gauge Converter
Look up chart thickness for sheet steel, aluminum or stainless steel by gauge number.
Thread Pitch Converter
Convert between TPI, millimetres per thread and inches per thread.
Mesh Size to Microns Converter
Look up nominal ASTM E11 sieve (mesh) apertures in microns and millimeters.
Hardness Scale Converter
Estimate HRB from selected HR30T, HR15T or Vickers values using a steel reference table.