← Engineering & Materials

Unit Converter

Pressure Gradient Converter

Convert a pressure gradient (pressure change per length) between SI and US units, with sign.

Convert pressure gradient

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Pressure Gradient Converter examples

These worked cases run pipeline and well gradients through the Pressure Gradient Converter.

InputExpected result
10 kPa/m0.442 psi/ft
1 psi/ft22.62 kPa/m
1 bar/m100 kPa/m

Supported units & limits

Converts a pressure gradient between units. Negative values are allowed because the gradient has a direction. The tool does not calculate a gradient from two pressures and a length, or convert to a head gradient: use the water column tool for that. Gauge and absolute pressure give the same gradient. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. The Pressure Gradient Converter treats gauge and absolute pressure alike, because a difference cancels the reference.

Common mistakes

A pressure gradient is per length, so it is not a pressure. psi/ft and psi/in differ by a factor of 12. A hydrostatic gradient depends on the fluid’s density, so 0.433 psi/ft is for fresh water. The sign of a gradient depends on the direction you measure, and pressure falls along the direction of flow.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Convert gradients, not pressures

Use this to compare pipe pressure drops or soil gradients in the same unit. Convert the gradient only, and multiply by a length if you need a total pressure difference. Drilling and well engineers often quote gradients in psi/ft, which the Pressure Gradient Converter turns into kPa/m.

Pressure Gradient Converter FAQ

How do I convert kPa/m to psi/ft?

Divide by 22.6206. A gradient of 10 kPa/m is 0.442 psi/ft.

What is the hydrostatic pressure gradient of water?

About 9.8 kPa per metre, or 0.433 psi per foot, for fresh water at normal gravity. It is higher for denser fluids.

Does the sign matter?

Yes. Pressure normally falls in the direction of flow, so the gradient along the flow is negative. The tool keeps the sign you enter.