Unit Converter
Sound Pressure Converter
Convert an (rms) sound pressure between pascals, micropascals, microbar and other units, and see its level in dB SPL for air.
Sound Pressure Converter examples
Here this converter is applied to 1 Pa, the hearing threshold and the microbar.
| Input | Expected result |
|---|---|
| 1 Pa | 10⁶ µPa · 10 µbar · 93.98 dB SPL (air) |
| 20 µPa | 0 dB SPL (air) · 0.0002 µbar |
| 1 µbar | 0.1 Pa · 1 dyn/cm² · 73.98 dB SPL (air) |
Supported units & limits
Converts a sound pressure value, which must be 0 or more, between units. The pressure is assumed to be an rms value, not a peak or peak-to-peak value. The level uses the air reference of 20 µPa. A level in water or another medium uses 1 µPa: use the Pa to dB SPL tool for that. The tool does not apply frequency weighting such as dBA and does not give an overall level from several sources. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. The dB SPL shown by this converter is unweighted; A- and C-weighted meter readings need their own corrections.
Common mistakes
A level in dB is not a pressure and cannot be added to one. Sound pressure in pascals is a small number: ordinary speech is a fraction of a pascal. Peak and rms values differ by a factor of 1.414 for a sine wave. A level in air and a level in water use different references, so the same pressure reads 26 dB higher in water. Atmospheric pressure is about 101,325 Pa and is not a sound pressure. A peak reading of a pure tone is √2 times its rms value, so convert peak to rms before using this converter.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.
Conversion guide
Check the reference and the weighting
Use pascals for calculations and dB SPL for reporting. Note the medium, because air and water use different references, and whether any frequency weighting was applied by the meter.
Sound Pressure Converter FAQ
How do I convert Pa to µbar?
Multiply the pascals by 10. One pascal is 10 microbar, and 1 µbar is 1 dyn/cm².
Why does the tool show dB SPL?
Sound pressure is often reported as a level. The level shown is for air, using a reference of 20 µPa. For water use the Pa to dB SPL tool and choose the water reference.
Is this peak or rms pressure?
It is treated as an rms value, which is what an SPL is based on. A peak value of a sine wave is 1.414 times the rms value.