Unit Converter
Water Column to Pressure Converter
Convert a height of water column to pressure, or pressure to a height of water, with an explicit reference density.
Water Column to Pressure Converter examples
| Input | Expected result |
|---|---|
| 1,000 mm of water, conventional | 9.80665 kPa · 98.07 mbar · 1.4223 psi |
| 1 m of water at 20 °C | 9.789 kPa · 1.4198 psi |
| 10 kPa, conventional | 1.0197 m · 40.15 in · 3.3455 ft of water |
Supported units & limits
The pressure is the hydrostatic pressure from the water column alone, so it does not include the pressure above the water surface. It assumes standard gravity and a constant density, which changes with temperature and salinity. The reference options are conventional (1,000 kg/m³), pure water at 4 °C and 20 °C and seawater at 1,025 kg/m³. Heights and pressures must be greater than 0 and at most 1,000,000,000. The tool does not convert to head for other fluids. Results use floating-point arithmetic and rounding follows the chosen precision.
Common mistakes
A water column unit is a pressure unit with a reference attached: inches of water at 4 °C and at 60 °F differ slightly, and conventional values assume 1,000 kg/m³. Do not mix a head of water with a head of another fluid. A column of water gives a gauge pressure, not an absolute pressure. Local gravity and temperature cause small differences from the standard values. Standards define inches of water at different water temperatures, so choose the reference density in the Water Column to Pressure Converter that matches your gauge.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Pick the reference your standard uses
Use the conventional reference for gauges and standards that define water column units. Use a real water density when you are working out the pressure of an actual column at a temperature. Remember that a water column gives a gauge pressure, so add the surface pressure for an absolute value.
Water Column to Pressure Converter FAQ
How much pressure is 1 mmH₂O?
Exactly 9.80665 Pa under the conventional definition, which uses a water density of 1,000 kg/m³ and standard gravity. Real water at 4 °C gives 9.80638 Pa.
How many psi is a metre of water?
About 1.4223 psi using the conventional definition, or 1.4198 psi for water at 20 °C. A foot of water is about 0.433 psi.
Why do inches of water have more than one value?
Because the reference temperature differs. Inches of water at 4 °C and at 60 °F use different densities, and the conventional figure uses a round density. The tool lets you choose.