← Engineering & Materials

Unit Converter

Heat Flux Converter

Convert heat flux (heat flow rate per unit area) between SI, US and calorie units, with sign for direction.

Convert heat flux

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Heat Flux Converter examples

These worked cases run solar, building and process heat-flux values through the Heat Flux Converter.

InputExpected result
1 BTU/(h·ft²)3.1546 W/m²
100 W/m²31.70 BTU/(h·ft²)
1 kW/m²317.0 BTU/(h·ft²)

Supported units & limits

Converts the units of heat flux. Negative values are allowed because heat flux has a direction: the sign only follows your convention. The tool does not calculate flux from a temperature difference or material, and it does not convert heat flow rate (W) without an area. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic.

Common mistakes

Heat flux is per area, so it is not the same as heat flow in watts. A flux in W/cm² is 10,000 times a flux in W/m². Solar irradiance is a flux and may be given in W/m². Do not confuse BTU/(h·ft²) with BTU/h: multiply by the area to get a power. Check whether the sign convention matters for your use. Full sunlight at the ground is roughly 1 kW/m²; enter it in the Heat Flux Converter to see about 317 BTU/(h·ft²).

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Multiply by area to get power

Convert the flux to the unit your data uses, and multiply by the surface area to get the heat flow rate. Keep the sign consistent with your chosen direction, and check that areas use matching units. Multiply a result from the Heat Flux Converter by the area in the same length unit to get a total heat flow.

Heat Flux Converter FAQ

How do I convert W/m² to BTU/(h·ft²)?

Divide the W/m² value by 3.154591. Direct sunlight at about 1,000 W/m² is about 317 BTU per hour per square foot.

What is the difference between heat flux and heat flow?

Heat flow is a power in watts. Heat flux is that power per unit area, so you multiply the flux by the area to get the heat flow.

Can heat flux be negative?

Yes. A negative flux means heat flows in the opposite direction to the one you chose as positive. The tool keeps the sign.