← Vehicles & Travel

Unit Converter

Car Tyre Size Calculator

Compare two metric tyre sizes to estimate their outer diameters, circumferences and speedometer change.

Compare two metric tyre sizes

Outer diameter change0.3798069315%
Estimated actual speed at indicated 100 (same speed unit)
100.3798069
Current outer diameter
631.9 mm
Comparison outer diameter
634.3 mm
Current circumference
1,985.172398 mm
Comparison circumference
1,992.71222 mm
Current sidewall height
112.75 mm
Comparison sidewall height
101.25 mm
Current wheel turns per kilometre
503.734588
Comparison wheel turns per kilometre
501.8286082

Nominal geometry only. Speed assumes the speedometer is accurate with the current size. Size similarity does not confirm vehicle or wheel compatibility.

Your calculation stays in your browser.

Car Tyre Size Calculator examples

InputExpected result
205/55R16112.75 mm sidewall · 631.9 mm outer diameter
225/45R17 compared with 205/55R16634.3 mm diameter · +0.379807% · indicated 100 → estimated 100.379807
205/55R16 compared with itself0% change · indicated 100 → estimated 100

Supported units & limits

Accepts metric codes such as 205/55R16, including P/LT prefixes, ZR, spaces and hyphen construction notation. Width must be 100–500 mm, aspect ratio 10–100% and rim diameter 8–30 inches. Omit load indices and speed ratings. Flotation sizes such as 31x10.50R15 are unsupported. These are nominal unloaded dimensions; actual dimensions and rolling circumference depend on the tyre model, pressure, wear and load. The speed estimate assumes correct original calibration. No fitment, clearance, load rating or legal approval is inferred.

Common mistakes

The 55 in 205/55R16 means 55% of the width, not a height of 55 mm. The 16 is the wheel rim diameter, not the tyre outer diameter. A larger replacement diameter increases actual speed for the same wheel rotation rate. Similar outer diameters can still require different wheels and can differ in clearance and load capacity. Load index and speed rating, such as 91V, do not affect size; leave them out when typing a code into this calculator.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Read the tyre sidewall before comparing

Copy only the size code from the sidewall into each field. Keep the current tyre as the reference and compare the diameter change. Use the swap button to reverse the reference; the percentage changes because its denominator changes. Check manufacturer specifications separately before selecting a replacement.

Car Tyre Size Calculator FAQ

What does 205/55R16 mean?

The nominal width is 205 mm, the sidewall height is 55% of that width, R denotes radial construction and the rim diameter is 16 inches.

Does the speed comparison use km/h or mph?

It works for either. If the indicated speed is 100 km/h, the result is in km/h; if it is 100 mph, the result is in mph. Selecting inches only changes the length results.

Can this confirm that a replacement tyre fits?

No. Check the vehicle and tyre manufacturer requirements for rim size and width, load and speed ratings, clearance and permitted sizes. This calculator compares nominal geometry only.

Why can measured circumference differ?

Nominal size markings do not specify exact manufactured dimensions or loaded rolling radius. Consult manufacturer data or measure the rolling distance for calibration.