← Engineering & Materials

Unit Converter

Dynamic Viscosity Converter

Convert dynamic viscosity measurements instantly, with explicit units and calculation details.

Choose your units

Result1Millipascal-seconds (mPa·s)

Results show up to 10 significant digits. Rounding can affect the final displayed digit.

Your calculation stays in your browser.

Quick conversion table

Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.

Centipoise (cP) → Millipascal-seconds (mPa·s)
Centipoise (cP)Millipascal-seconds (mPa·s)
11
22
55
1010
2020
5050
100100
250250
500500
1,0001,000
Millipascal-seconds (mPa·s) → Centipoise (cP)
Millipascal-seconds (mPa·s)Centipoise (cP)
11
22
55
1010
2020
5050
100100
250250
500500
1,0001,000

Dynamic Viscosity Converter examples

InputExpected result
1 Centipoise (cP) → Millipascal-seconds (mPa·s)1 Millipascal-seconds (mPa·s)
1 Poise (P) → Pascal-seconds (Pa·s)0.1 Pascal-seconds (Pa·s)
1000 Centipoise (cP) → Pascal-seconds (Pa·s)1 Pascal-seconds (Pa·s)

Supported units & limits

Supports Pascal-seconds (Pa·s), Millipascal-seconds (mPa·s), Poise (P), Centipoise (cP), Pounds per foot-second [lb/(ft·s)]. Enter zero or a positive decimal. Values use floating-point arithmetic and up to 10 displayed significant digits.

Common mistakes

Dynamic viscosity and kinematic viscosity differ by density. Temperature and shear conditions can change the physical value.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Working with dynamic viscosity units

One poise is 0.1 Pa·s; one centipoise is 0.001 Pa·s. A millipascal-second and a centipoise have equal magnitudes. Dynamic viscosity and kinematic viscosity differ by density. Temperature and shear conditions can change the physical value. Keep the original measurement conditions and unit labels with your result.

Dynamic Viscosity Converter FAQ

Is cP the same as cSt?

No. cP measures dynamic viscosity and cSt measures kinematic viscosity. Relating them requires density.

How does this dynamic viscosity converter calculate the result?

It multiplies by the source unit’s factor in pascal-seconds, then divides by the destination unit’s factor. The displayed result is rounded only at the end.