← Engineering & Materials

Unit Converter

Heat Transfer Coefficient Converter

Convert a heat transfer coefficient (h) or surface U-value between W/(m²·K) and US units.

Convert heat transfer coefficient

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Heat Transfer Coefficient Converter examples

Checked results from the Heat Transfer Coefficient Converter cover film coefficients and window U-values.

InputExpected result
1 BTU/(h·ft²·°F)5.678 W/(m²·K)
10 W/(m²·K)1.761 BTU/(h·ft²·°F)
1 W/(cm²·K)10,000 W/(m²·K)

Supported units & limits

Converts the units of a heat transfer coefficient, also used for the U-value of a wall or window. The value must be 0 or more and temperatures are intervals, so °C and K are the same. The tool does not calculate the coefficient from fluid properties, and it does not distinguish convective, overall or radiative coefficients. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic.

Common mistakes

A U-value is a heat transfer coefficient, and R is its reciprocal, so a high coefficient is poor insulation. A coefficient per square foot is not per square metre: the difference is a factor of 10.764 before the BTU and degree conversions. Do not use the temperature of a reading in place of a temperature difference. Check whether the value is for convection, an assembly or a surface film.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Keep coefficients and resistances separate

Convert the coefficient into the unit your calculation uses, and keep in mind that a higher coefficient transfers more heat. To go between a U-value and an R-value, take the reciprocal and convert the units, as the R-value tool does.

Heat Transfer Coefficient Converter FAQ

How do I convert W/(m²·K) to BTU/(h·ft²·°F)?

Divide the W/(m²·K) value by 5.678263. A coefficient of 10 W/(m²·K) is 1.761 BTU/(h·ft²·°F).

Is a U-value the same as a heat transfer coefficient?

A U-value is the overall heat transfer coefficient of a building element, with the same units. Its reciprocal is the R-value, so use the R-value to U-value tool for that relation.

Which temperature difference does the unit use?

The difference between the two sides. Because it is an interval, 1 K equals 1 °C and 1 °F is 5/9 K, with no offset.