← Engineering & Materials

Unit Converter

Young's Modulus Converter

Convert Young's modulus, the elastic modulus, between SI and US units.

Convert young's modulus

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Young's Modulus Converter examples

InputExpected result
200 GPa29.008 Msi · 29,008 ksi
1 Msi6.8948 GPa
1 kgf/mm²9.80665 MPa

Supported units & limits

Converts a modulus value, which must be 0 or more, between units. It does not look up a material’s modulus or distinguish Young's modulus from the shear or bulk modulus, which share the same units. Real moduli vary with temperature, alloy and loading. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic.

Common mistakes

A modulus is a stiffness, not a strength: 200 GPa does not say how much stress steel can carry. Msi means millions of psi, so 29 Msi is 29,000,000 psi. Do not confuse the elastic modulus with stress: stress is the load per area, modulus is stress per strain. Shear modulus and bulk modulus use the same units but are different properties. Shear and bulk moduli share these units, so confirm which modulus a table lists before using the Young's Modulus Converter.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Compare stiffness in one unit

Convert each modulus to GPa or Msi before comparing materials, and remember that moduli change with temperature. Use the modulus together with strain to find elastic stress.

Young's Modulus Converter FAQ

How do I convert GPa to psi?

Multiply by 145,038. A modulus of 200 GPa is about 29,008,000 psi, or 29 Msi.

What is Msi?

Millions of pounds per square inch. Steel is about 29 to 30 Msi, and aluminium about 10 Msi.

Is Young’s modulus a strength?

No. It measures stiffness in the elastic range. Strength is the stress at which the material yields or fails, which is a separate property.