← Engineering & Materials

Unit Converter

Volumetric Flux Converter

Convert volumetric flux, also called filtration rate or Darcy velocity, between SI and US units.

Convert volumetric flux

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Volumetric Flux Converter examples

Checked results from the Volumetric Flux Converter cover filter loading rates.

InputExpected result
1 gpm/ft²2.4447 m/h
5 gpm/ft²12.22 m/h
1 m/h0.4090 gpm/ft²

Supported units & limits

Converts a flux between units. Values must be 0 or more. The flux is the superficial velocity based on the whole cross-section, not the speed of the fluid in the pores. The tool does not calculate a flux from flow and area, or convert to flow rate, which needs an area. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. The Volumetric Flux Converter gives superficial velocity; the speed in the pores is higher, by roughly one over the porosity.

Common mistakes

A volumetric flux is not a flow rate: it is per area. Filter loading in gpm/ft² is different from m/h only by units: 1 gpm/ft² is 2.445 m/h. The flux through a porous medium is smaller than the real pore velocity, which is the flux divided by the porosity. Do not confuse m³/(m²·h) with m³/h.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Multiply by area for flow rate

Use the flux with the area to find the flow rate, and divide by the porosity to estimate the actual pore velocity. Convert between filtration units such as gpm/ft² and m/h when comparing designs. Water treatment designs quote filter and clarifier loading in m/h or gpm/ft², which the Volumetric Flux Converter converts directly.

Volumetric Flux Converter FAQ

How do I convert gpm/ft² to m/h?

Multiply by 2.4447. A filter loaded at 5 gpm/ft² has a flux of 12.2 m/h.

Is volumetric flux a velocity?

It has the units of velocity and is the average velocity through the whole cross-section, but the fluid in a porous medium moves faster through the pores.

What is the Darcy velocity?

The volumetric flux through a porous medium, equal to the flow rate divided by the total cross-sectional area. It is the quantity in Darcy’s law.