← Engineering & Materials

Unit Converter

Temperature Gradient Converter

Convert a temperature gradient (temperature difference per length) between SI and US units, with sign.

Convert temperature gradient

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Temperature Gradient Converter examples

Here the Temperature Gradient Converter is applied to positive and negative gradients.

InputExpected result
30 K/m16.46 °F/ft
1 °F/ft1.8227 K/m
-5 K/m-2.743 °F/ft

Supported units & limits

Converts units of a temperature difference per length. Negative values are allowed because the gradient has a direction. Do not enter a temperature reading as if it were a difference: this tool does not apply the °C to °F offset of 32. The value is 0 or more in magnitude up to floating-point limits. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. The Temperature Gradient Converter keeps the sign you enter; it does not decide whether heat flows up or down.

Common mistakes

A gradient in °C/m and K/m are identical, but a gradient in °F/ft is not 1.8 times °C/m. It is converted as 5/9 K per foot, so 1 °F/ft = 1.8227 K/m. Do not add 32 when converting a difference. K/km and K/m differ by a factor of 1,000. The sign of a gradient depends on the direction you measure. Geothermal gradients are often quoted per kilometre, so enter 25 °C/km as 0.025 K/m in the Temperature Gradient Converter.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Convert differences, not readings

Use this for rates of temperature change with distance, such as through a wall or into the ground. Keep the sign consistent with your chosen direction. If you have two temperature readings, subtract them first, then divide by the distance.

Temperature Gradient Converter FAQ

How do I convert °C/m to °F/ft?

Divide the °C per metre by 1.822689. A gradient of 30 °C/m is 16.46 °F/ft. No offset of 32 is added because it is a temperature difference.

Why is there no 32 in the conversion?

The 32 degree offset applies only to temperature readings. A gradient is a difference, which scales by 5/9 and has no offset.

Can a gradient be negative?

Yes. The sign shows whether temperature rises or falls in your chosen direction, and the tool keeps it.