Unit Converter
Stress Converter
Convert mechanical stress (force per area) between SI and US units, with sign for tension and compression.
Stress Converter examples
The table puts a typical structural steel yield stress through this converter.
| Input | Expected result |
|---|---|
| 250 MPa | 36.26 ksi · 36,259 psi |
| 1 ksi | 6.8948 MPa |
| -100 MPa | -14,503.8 psi |
Supported units & limits
Converts a stress value between units. Negative values are allowed so tension and compression can carry opposite signs by your convention. The tool changes units only: it does not work out stress from force and area, apply safety factors, or distinguish normal stress from shear stress, von Mises stress or pressure. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. Shear, bending and von Mises stresses use the same units, so this converter converts them all the same way.
Common mistakes
Stress and pressure share units but are different quantities: a tensile stress is not a pressure, and gauge or absolute pressure has no meaning here. 1 ksi is 1,000 psi, and 1 MPa is about 145 psi, not 1,000. Do not confuse kgf/cm² with bar: 1 kgf/cm² is 0.980665 bar. The sign of a stress depends on your convention. Check whether a value is a stress or a modulus before converting. MPa and N/mm² are the same unit; entering one as the other in this converter changes nothing.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.
Conversion guide
Convert the stress, then compare with the strength
Convert the stress to the unit used for the material’s strength before comparing. Check whether an allowable stress already contains a safety factor, and keep the sign convention consistent when combining stresses. Material tables in the US list strengths in ksi, so convert design stresses with this converter before comparing.
Stress Converter FAQ
How do I convert MPa to psi?
Multiply by 145.038. A stress of 250 MPa is 36,259 psi, or 36.26 ksi.
Is MPa the same as N/mm²?
Yes. One megapascal is one newton per square millimetre, since 1 mm² is 10⁻⁶ m² and 1 MPa is 10⁶ Pa.
Does the sign matter?
The sign only carries your convention, for example tension positive and compression negative. The tool keeps the sign and converts the magnitude.
Can this converter convert a yield strength?
Yes. Yield and ultimate strengths are stresses, so this converter converts them between MPa, ksi, psi and kgf/cm² like any other stress.
Does this converter handle negative values?
Yes. This converter keeps the sign, so compressive stress written as a negative number stays negative.