Unit Converter
Board Feet Calculator
Calculate board feet for one board or a stack, with waste allowance, price and cubic equivalents.
Board Feet Calculator examples
Sample inputs for this calculator include single boards and a priced stack.
| Input | Expected result |
|---|---|
| 1 × 6 inch board, 8 ft long | 4 board feet |
| 2 × 4 inch board, 8 ft long | 5.33 board feet |
| 5 boards 1 × 6 × 8 ft with 10 % waste at 8.50 each bf | 20 bf, buy 22 bf, cost 187.00 |
Supported units & limits
Dimensions must be greater than 0 and at most 100,000 in the chosen unit; pieces are a whole number from 1 to 100,000; waste is 0 to 100 %; price is 0 or more per board foot and the price field is ignored at 0. The tool measures volume with the dimensions you enter. Lumber is usually sold by its nominal or rough size, and surfaced boards are smaller, so enter the size your supplier uses to price. It does not convert to weight, estimate species or moisture, round board feet up for tally rules, or handle round logs.
Common mistakes
A 2 × 4 is nominal: it is 2 inches by 4 inches only when rough, and a surfaced stud is about 1.5 by 3.5 inches. Dealers usually price by nominal size, so use the nominal thickness and width for cost and the actual size for fitting. Enter the length in feet, not inches, unless you choose inches. Board feet are volume, not length: a 1 × 12 × 1-foot board is one board foot, and so is a 2 × 6 × 1-foot board. Hardwood dealers price rough lumber by nominal thickness in quarters, such as 4/4 or 8/4; enter that thickness in this calculator.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.
Conversion guide
Add up each size, then allow for waste
Enter one board size at a time and the number of identical pieces. Add the totals for different sizes yourself. Decide a waste allowance for knots, defects and cut offs, and compare the quantity to buy with the supplier’s board-foot price. Check the rounding and measuring rules your supplier uses, because some tallies round each board up.
Board Feet Calculator FAQ
How do I calculate board feet?
Multiply thickness in inches by width in inches by length in feet, then divide by 12. For a 2 × 10 board 12 feet long: 2 × 10 × 12 ÷ 12 = 20 board feet.
Should I use nominal or actual size?
Lumber yards usually price hardwood by rough thickness and softwood by nominal size, so use the size on the price list to estimate cost. Use actual dimensions when working out how a surfaced board will fit your project.
How much waste allowance should I add?
It depends on the project, board quality and cuts. A common allowance is 10 to 20 percent. Enter your own value, because the tool does not decide waste for you.
Can this calculator work in metric?
Yes. Enter millimetres, centimetres or metres; this calculator converts them to inches and still reports board feet and cubic metres.