← Digital, Network & Web

Unit Converter

Download Time Calculator

Estimate remaining download time from file size, rate, usable throughput and completed percentage.

Download Time Calculator

Remaining download time in seconds80s
Remaining download time in minutes
1.333333333 min
Remaining download time in hours
0.02222222222 h
Same payload at 100% usable throughput
80 s
Assumed useful payload rate
12.5 MB/s
Payload counted in this estimate
1 GB

Remaining payload = file size × (100 − completed percentage) / 100. The rate is assumed constant. Copy includes the estimate and its supporting values.

Your calculation stays in your browser.

Download Time Calculator examples

Checked results from this calculator cover full and partly completed downloads.

InputExpected result
1 GB at 100 Mbps, 100% usable80 s
1 GiB at 1 MiB/s, 100% usable1024 s
1 GB at 100 Mbps, 80% usable100 s
1 GB, 25% complete, 100 Mbps at 100% usable60 s remaining

Supported units & limits

Size supports B, decimal kB/MB/GB/TB and binary KiB/MiB/GiB/TiB. Rates support bit/s, kbit/s, Mbit/s, Gbit/s, B/s, kB/s, MB/s and MiB/s. Size is 0–1e12, rate is greater than 0 through 1e12 in its chosen unit, and usable percentage is greater than 0 through 100. Completed percentage is 0–100. Results use floating-point arithmetic with selected display precision. This is payload-only constant-rate arithmetic, not a live network measurement or a protocol simulation. Fixed setup delays, congestion, changing rates, stalls and retries are not modeled.

Common mistakes

Do not confuse Mbps with MB/s or decimal GB with binary GiB. If the entered rate already measures useful payload, use 100% to avoid counting overhead twice. A configured usable percentage is an assumption, not a measured network efficiency. Enter the full file size, then the percentage already downloaded; do not subtract completed data a second time. Browsers often show download speed in MB/s; select MB/s in this calculator rather than Mbit/s for that number.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Use a rate that matches the transfer direction

Select the actual unit labels used by your source. For downloads, use the download direction; for uploads, use the upload direction. Check whether the rate is a nominal bit rate or an observed payload rate, choose the usable share accordingly, then read the estimated duration. Use a measured sustained rate for a more representative constant-rate estimate.

Download Time Calculator FAQ

Why does file size in bytes need a factor of eight?

Network rates commonly count bits per second, while file sizes count bytes. Each byte contains eight bits.

What does usable throughput mean?

It is your assumed payload share of the entered rate. Use 100% when the rate already measures useful file data; reduce it only for losses not already reflected in that rate.

Is this a live measurement?

No. This constant-rate estimate uses only the values you supply. Server limits, congestion, startup, retransmissions and disk delays can change actual time.

How is remaining time calculated?

Only the undownloaded fraction of the entered file size is counted. At 100% complete the remaining transfer time is zero.