Unit Converter
Kinematic Viscosity Converter
Convert kinematic viscosity measurements instantly, with explicit units and calculation details.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Centistokes (cSt) | Square millimetres per second (mm²/s) |
|---|---|
| 1 | 1 |
| 2 | 2 |
| 5 | 5 |
| 10 | 10 |
| 20 | 20 |
| 50 | 50 |
| 100 | 100 |
| 250 | 250 |
| 500 | 500 |
| 1,000 | 1,000 |
| Square millimetres per second (mm²/s) | Centistokes (cSt) |
|---|---|
| 1 | 1 |
| 2 | 2 |
| 5 | 5 |
| 10 | 10 |
| 20 | 20 |
| 50 | 50 |
| 100 | 100 |
| 250 | 250 |
| 500 | 500 |
| 1,000 | 1,000 |
Kinematic Viscosity Converter examples
| Input | Expected result |
|---|---|
| 1 Centistokes (cSt) → Square millimetres per second (mm²/s) | 1 Square millimetres per second (mm²/s) |
| 1 Stokes (St) → Centistokes (cSt) | 100 Centistokes (cSt) |
| 1 Square feet per second (ft²/s) → Square metres per second (m²/s) | 0.09290304 Square metres per second (m²/s) |
Supported units & limits
Supports Square metres per second (m²/s), Square millimetres per second (mm²/s), Stokes (St), Centistokes (cSt), Square feet per second (ft²/s). Enter zero or a positive decimal. Values use floating-point arithmetic and up to 10 displayed significant digits.
Common mistakes
Kinematic viscosity is dynamic viscosity divided by density. A unit conversion alone cannot predict a fluid’s viscosity at another temperature.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Working with kinematic viscosity units
One stokes is 10⁻⁴ m²/s, and one centistokes is 10⁻⁶ m²/s. The latter is also one mm²/s. Kinematic viscosity is dynamic viscosity divided by density. A unit conversion alone cannot predict a fluid’s viscosity at another temperature. Keep the original measurement conditions and unit labels with your result.
Kinematic Viscosity Converter FAQ
Why do cSt and mm²/s give the same value?
They are equal-sized units: both represent 10⁻⁶ square metres per second.
How does this kinematic viscosity converter calculate the result?
It multiplies by the source unit’s factor in square metres per second, then divides by the destination unit’s factor. The displayed result is rounded only at the end.