← Engineering & Materials

Unit Converter

Hydraulic Power Calculator

Calculate the hydraulic power of a pump or flow from the flow rate and the head or pressure, and the shaft power for a given efficiency.

Calculate hydraulic and shaft power

Result—

Steady incompressible flow. Pump efficiency only; motor and drive losses are not included.

Your calculation stays in your browser.

Hydraulic Power Calculator examples

Use these rows to compare your own Hydraulic Power Calculator result for head and pressure inputs.

InputExpected result
20 L/s at 30 m head, density 998 kg/m³, 70 % efficient5.872 kW hydraulic · 8.389 kW shaft (11.25 hp)
100 gpm at 60 psi, 65 % efficient2.610 kW hydraulic (3.50 hp) · 4.015 kW shaft
20 L/s at 300 kPa6.00 kW hydraulic

Supported units & limits

Treats the flow as steady and the fluid as incompressible, with a single density. The density is an input for head (default 998 kg/m³, close to water at 20 °C) and must be greater than 0 and at most 50,000 kg/m³. Flow, head and pressure are greater than 0, and efficiency is greater than 0 up to 100 %. The efficiency is for the pump alone: motor and drive efficiency are not included. The tool does not calculate pipe losses, NPSH or the pump curve. Results use floating-point arithmetic and rounding follows the chosen precision. The Hydraulic Power Calculator does not add pipe friction; include it in the head or pressure you enter.

Common mistakes

Hydraulic power is the useful power in the fluid, not the power drawn from the motor, which is larger by the pump, motor and drive efficiencies. Head in metres of water is different from head in metres of another fluid, so enter the density. Use differential pressure across the pump, not the discharge gauge pressure alone. Do not use the same efficiency for pump and motor. Pump curves show head in metres or feet of the pumped liquid, so set its density in the Hydraulic Power Calculator.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Use the pressure rise across the pump

Choose head or differential pressure, and enter the flow. For head, enter the density of your fluid. Add the efficiency you expect for the pump at the operating point from its curve, not the best efficiency. Check the result against the motor rating and allow a margin.

Hydraulic Power Calculator FAQ

How do I calculate pump hydraulic power?

Multiply the flow rate in m³/s by the pressure rise in pascals to get watts. With head, use density × 9.80665 × head × flow rate.

What is the difference between hydraulic power and shaft power?

Hydraulic power is what the pump puts into the fluid. Shaft power is what the pump needs at its shaft, which is the hydraulic power divided by the pump efficiency.

How do I include the motor?

Divide the shaft power by the motor efficiency to find the electrical power. This tool stops at the shaft.

Does the Hydraulic Power Calculator give motor power?

The Hydraulic Power Calculator gives hydraulic and shaft power; divide the shaft power by the motor efficiency to estimate electrical input.