Unit Converter
Reynolds Number Calculator
Calculate the Reynolds number from velocity, a characteristic length and the fluid’s density and viscosity, and read the flow regime.
Reynolds Number Calculator examples
Checked results from the Reynolds Number Calculator cover water and air in pipes and ducts.
| Input | Expected result |
|---|---|
| Water at 20 °C, 1.5 m/s, 50 mm pipe | Re 74,716 · turbulent |
| Air at 20 °C, 10 m/s, 100 mm duct | Re 65,973 · turbulent |
| Water at 20 °C, 0.01 m/s, 20 mm pipe | Re 199 · laminar |
Supported units & limits
The characteristic length must be stated by the user: for a round pipe use the inside diameter, and for other shapes use the hydraulic diameter or the length your correlation uses. The built-in fluids are water and air near 20 °C and 1 atm with typical values, and a custom fluid takes any density up to 50,000 kg/m³ and a dynamic viscosity in Pa·s up to 1,000,000. Viscosity changes strongly with temperature. The 2,300 and 4,000 limits apply to flow in a pipe and do not describe flow over a plate, a sphere or an open channel. Results use floating-point arithmetic and rounding follows the chosen precision. The regime label in the Reynolds Number Calculator uses the usual pipe-flow ranges, which do not apply to flat plates or flow around bodies.
Common mistakes
Use dynamic viscosity in Pa·s with density, or kinematic viscosity in m²/s without it. Centipoise is a thousandth of Pa·s, so 1 cP is 0.001 Pa·s. The length is the inside diameter for a pipe, not the radius or the outside diameter. The flow regime thresholds are for pipes only. A Reynolds number is dimensionless, so the units of velocity and length must be consistent, and the tool handles that.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
State the length, the velocity and the fluid
Choose the velocity and the characteristic length, then select water or air, or enter a density and a dynamic viscosity for your fluid at its temperature. The result shows the Reynolds number, the kinematic viscosity and the pipe-flow regime. Use friction-factor charts or correlations for pressure drops.
Reynolds Number Calculator FAQ
What is the Reynolds number?
A dimensionless number that compares inertia with viscous forces. Low values mean smooth laminar flow and high values mean turbulent flow.
At what Reynolds number does pipe flow become turbulent?
Commonly taken as laminar below about 2,300 and turbulent above about 4,000, with a transitional range between them. The exact change depends on the roughness and disturbances.
Which length do I use?
For a round pipe use the inside diameter. For other shapes, use the hydraulic diameter, which is four times the flow area divided by the wetted perimeter, or the length your correlation specifies.
Does the Reynolds Number Calculator work for air in a duct?
Yes. Choose air or enter a custom density and viscosity, and use the hydraulic diameter of the duct as the length in the Reynolds Number Calculator.