← Engineering & Materials

Unit Converter

Hydraulic Conductivity Converter

Convert hydraulic conductivity (K), the ease with which water moves through soil or rock, between speed units.

Convert hydraulic conductivity

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Hydraulic Conductivity Converter examples

Sample inputs for the Hydraulic Conductivity Converter include laboratory and field units.

InputExpected result
0.001 cm/s0.864 m/day · 10⁻⁵ m/s
1 m/day1.1574 × 10⁻⁵ m/s
1 gpd/ft²0.0407 m/day

Supported units & limits

Converts a hydraulic conductivity between units. Values must be 0 or more. The tool changes units only. It does not turn a conductivity into an intrinsic permeability, because that needs the fluid’s density and viscosity, and the temperature changes both. It does not estimate K for a soil from its grain size. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. K depends on the fluid and its temperature; the Hydraulic Conductivity Converter converts the value you enter without adjusting for either.

Common mistakes

Hydraulic conductivity K and intrinsic permeability k are different quantities: K is in m/s and applies to a particular fluid, usually water, while k is in m² or darcy and describes the medium alone. 1 darcy is about 9.6 × 10⁻⁶ m/s of K for water at 20 °C, and this tool does not apply that conversion. gpd/ft² is a rate per area, not a flow. Values vary by many orders of magnitude between gravel and clay. Field reports often give K in m/day, while lab tests give cm/s; 1 cm/s is 864 m/day in the Hydraulic Conductivity Converter.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Keep the fluid in mind

Convert K to the unit used by your groundwater model or test. Remember it is for the fluid used, normally water at a stated temperature. For a different fluid or temperature, work from the intrinsic permeability.

Hydraulic Conductivity Converter FAQ

How do I convert cm/s to m/day?

Multiply by 864. A hydraulic conductivity of 0.001 cm/s is 0.864 m/day.

What is the difference between hydraulic conductivity and permeability?

Hydraulic conductivity includes the fluid’s properties, so it is for water in practice. Intrinsic permeability depends only on the porous medium and has units of area. Use the permeability tool for the second.

Why does conductivity change with temperature?

Because it depends on the fluid’s viscosity and density, which change with temperature. Warmer water flows more easily, so K is higher.