← Chemistry & Concentration

Unit Converter

Solution Dilution Calculator

Solve the dilution equation C₁V₁ = C₂V₂ for any one unknown and see how much diluent to add.

Solve a dilution

Stock volume V₁5mL
Volume of diluent to add (V₂ − V₁)
45 mL
Dilution factor (C₁ ÷ C₂)
10

Assumes ideal additive volumes and conserved solute. Use the same concentration unit for both concentrations.

Your calculation stays in your browser.

Solution Dilution Calculator examples

Checked results from this calculator cover a 10× stock, a molar stock and a target volume.

InputExpected result
10× stock, 50 mL of 1× neededtake 5 mL stock · add 45 mL diluent · factor 10
5 M stock, 2 mL into 40 mLfinal 0.25 M
4 M stock to 1 M in 100 mLtake 25 mL stock

Supported units & limits

Use the same concentration unit for C₁ and C₂ and the same volume unit for V₁ and V₂; the volume unit is chosen once. All values must be greater than 0 and at most 10¹². The equation assumes volumes add and solute is conserved, which is not exact for concentrated solutions, solvent mixtures and reactions. The tool requires a true dilution: the final volume must be larger and the final concentration smaller than the stock. Results use floating-point arithmetic and rounding follows the chosen precision.

Common mistakes

V₁ is the stock to take, and the diluent is V₂ − V₁, not V₂. Do not add V₂ of diluent to V₁ of stock, or the final volume is too large. Concentrations must be in the same unit. Volumes of concentrated mixtures may not be exactly additive, so for precise work make up to the mark in a volumetric flask. Use the same concentration unit for both solutions in this calculator; mixing mM and M gives a result off by 1,000.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Add the stock to the diluent and make up to volume

Measure the stock volume, place it in a volumetric flask, and add diluent up to the final mark. Mix well. For serial dilutions, repeat the calculation for each step with the new stock.

Solution Dilution Calculator FAQ

How do I use C₁V₁ = C₂V₂?

Choose the unknown, enter the other three, and read the result. For example, to make 100 mL of 1 M from a 4 M stock you take 25 mL and make up to 100 mL.

How much diluent do I add?

The final volume minus the stock volume. The tool shows it as the diluent volume.

What is the dilution factor?

The stock concentration divided by the final concentration. A 10-fold dilution has a factor of 10, meaning one part stock in ten parts final volume.