← Engineering & Materials

Unit Converter

Thermal Resistance Converter

Convert the overall thermal resistance of an element between SI and US units.

Convert thermal resistance

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Thermal Resistance Converter examples

These worked cases run heat-sink and component resistances through the Thermal Resistance Converter.

InputExpected result
0.5 K/W0.2638 °F·h/BTU
1 °F·h/BTU1.8956 K/W
2 K/kW0.002 K/W

Supported units & limits

Converts overall thermal resistance, for a specific component such as a heat sink, a pipe wall or a joint. It is not per unit area. For the area resistance of a building layer (R-value or RSI) use the R-value to U-value tool. Values are 0 or more. The tool does not calculate resistance from dimensions and conductivity. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic.

Common mistakes

Thermal resistance in K/W is for the whole element and is not the same as R-value, which is per unit area. R-value in ft²·°F·h/BTU is not °F·h/BTU: the area is missing. A smaller resistance transfers heat more easily. Do not mix K/W with W/K, its reciprocal. Make sure temperatures are intervals and not readings. Electronics datasheets give junction-to-case resistance in K/W or °C/W, which are the same unit in the Thermal Resistance Converter.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Use resistance for components and R-value for layers

Use this for a heat sink, a pipe or any one object whose resistance you know in K/W. For a layer of a wall or roof, convert the R-value or RSI instead. Add resistances in series to find the total, and keep temperatures as differences.

Thermal Resistance Converter FAQ

How do I convert K/W to °F·h/BTU?

Divide the K/W value by 1.895634. A heat sink with 0.5 K/W has 0.2638 °F·h/BTU.

What is the difference between K/W and R-value?

K/W is the resistance of the whole element. An R-value is the resistance per unit area of a layer, with the area included, so you divide K/W by the area to get an area resistance.

Is thermal resistance the same as thermal conductance?

No. Conductance, in W/K, is the reciprocal of resistance. A high resistance means a low conductance.