← Electricity & Magnetism

Unit Converter

Electric Potential Converter

Convert electric potential measurements instantly, with explicit units and calculation details.

Choose your units

Result1,000Millivolts (mV)

Results show up to 10 significant digits. Rounding can affect the final displayed digit.

Your calculation stays in your browser.

Quick conversion table

Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.

Volts (V) → Millivolts (mV)
Volts (V)Millivolts (mV)
11,000
22,000
55,000
1010,000
2020,000
5050,000
100100,000
250250,000
500500,000
1,0001,000,000
Millivolts (mV) → Volts (V)
Millivolts (mV)Volts (V)
10.001
20.002
50.005
100.01
200.02
500.05
1000.1
2500.25
5000.5
1,0001

Electric Potential Converter examples

InputExpected result
1 Volts (V) → Millivolts (mV)1,000 Millivolts (mV)
1 Kilovolts (kV) → Volts (V)1,000 Volts (V)
1000 Microvolts (µV) → Millivolts (mV)1 Millivolts (mV)

Supported units & limits

Supports Volts (V), Millivolts (mV), Microvolts (µV), Kilovolts (kV), Megavolts (MV). Signed readings or changes are accepted. Values use floating-point arithmetic and up to 10 displayed significant digits.

Common mistakes

Peak and RMS voltages are not interchangeable through a prefix factor. A negative voltage is relative to a chosen reference.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Working with electric potential units

Electric potential difference uses volts. Prefixes scale the same voltage reading; one volt is one joule per coulomb. Peak and RMS voltages are not interchangeable through a prefix factor. A negative voltage is relative to a chosen reference. Keep the original measurement conditions and unit labels with your result.

Electric Potential Converter FAQ

Does changing volts to millivolts change polarity?

No. The converter preserves the sign and reference of the input value.

How does this electric potential converter calculate the result?

It multiplies by the source unit’s factor in volts, then divides by the destination unit’s factor. The displayed result is rounded only at the end.