← Engineering & Materials

Unit Converter

Mass Flux Converter

Convert mass flux, the mass flow rate per unit area, between SI and US units.

Convert mass flux

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Mass Flux Converter examples

Below, the Mass Flux Converter works through SI and US mass-flux units.

InputExpected result
1 kg/(m²·s)737.34 lb/(ft²·h)
1 lb/(ft²·s)4.8824 kg/(m²·s)
1 g/(cm²·s)10 kg/(m²·s)

Supported units & limits

Converts mass flux values, which must be 0 or more, between units. It does not calculate the flux from a flow rate and area, which is mass flow rate in kg/s divided by the cross-section in m². Mass flux is not volumetric flux: multiplying by a density turns one into the other. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic. The Mass Flux Converter needs a flux; divide a mass flow rate by the flow area first if you start from kg/s.

Common mistakes

Mass flux is per area, so it is not a mass flow rate in kg/s: multiply by the area for that. Per-second and per-hour units differ by a factor of 3,600. A g/(cm²·s) is ten thousand times a g/(m²·s) after the area factor, so check the area unit. Mass flux is not volumetric flux, which is a velocity.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Multiply by area to get a flow rate

Use mass flux in heat exchangers, drying and reactor calculations. Convert it to the unit of your correlation and check the area basis, then multiply by the cross-section to find the flow rate.

Mass Flux Converter FAQ

How do I convert kg/(m²·s) to lb/(ft²·h)?

Multiply by 737.34, which is 3,600 × 0.09290304 ÷ 0.45359237.

What is the difference between mass flux and mass flow rate?

Mass flow rate is total mass per time in kg/s. Mass flux is that rate per unit area. Multiply the flux by the area to get the flow rate.

How is mass flux related to velocity?

Mass flux equals density times velocity, so 1,000 kg/m³ moving at 0.5 m/s is a flux of 500 kg/(m²·s).