← Sound, Light & Space

Unit Converter

Illuminance Converter

Convert illuminance measurements instantly, with explicit units and calculation details.

Choose your units

Result10.76391042Lux (lx)

Results show up to 10 significant digits. Rounding can affect the final displayed digit.

Your calculation stays in your browser.

Quick conversion table

Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.

Footcandles (fc) → Lux (lx)
Footcandles (fc)Lux (lx)
110.76391042
221.52782083
553.81955208
10107.6391042
20215.2782083
50538.1955208
1001,076.391042
2502,690.977604
5005,381.955208
1,00010,763.91042
Lux (lx) → Footcandles (fc)
Lux (lx)Footcandles (fc)
10.09290304
20.18580608
50.4645152
100.9290304
201.8580608
504.645152
1009.290304
25023.22576
50046.45152
1,00092.90304

Illuminance Converter examples

InputExpected result
1 Footcandles (fc) → Lux (lx)10.76391042 Lux (lx)
1 Phot (ph) → Lux (lx)10,000 Lux (lx)
1 Kilolux (klx) → Lux (lx)1,000 Lux (lx)

Supported units & limits

Supports Lux (lx), Kilolux (klx), Millilux (mlx), Footcandles (fc), Phot (ph). Enter zero or a positive decimal. Values use floating-point arithmetic and up to 10 displayed significant digits.

Common mistakes

Illuminance is incident light per area. Lumens alone cannot determine lux without the illuminated area and light distribution. Lux describes light arriving at a surface, so a lamp's lumen rating cannot go into this converter without the lit area.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.

Conversion guide

Working with illuminance units

Lux is lumens per square metre. One footcandle is one lumen per square foot, using the international foot. Illuminance is incident light per area. Lumens alone cannot determine lux without the illuminated area and light distribution. Keep the original measurement conditions and unit labels with your result.

Illuminance Converter FAQ

Can I convert lumens directly into lux?

Area and distribution are needed. For uniform illumination, lux equals lumens received divided by square metres.

How does this illuminance converter calculate the result?

It multiplies by the source unit’s factor in lux, then divides by the destination unit’s factor. The displayed result is rounded only at the end.