Unit Converter
Density Converter
Convert density measurements instantly, with explicit units and calculation details.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Grams per cubic centimetre (g/cm³) | Kilograms per cubic metre (kg/m³) |
|---|---|
| 1 | 1,000 |
| 2 | 2,000 |
| 5 | 5,000 |
| 10 | 10,000 |
| 20 | 20,000 |
| 50 | 50,000 |
| 100 | 100,000 |
| 250 | 250,000 |
| 500 | 500,000 |
| 1,000 | 1,000,000 |
| Kilograms per cubic metre (kg/m³) | Grams per cubic centimetre (g/cm³) |
|---|---|
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 20 | 0.02 |
| 50 | 0.05 |
| 100 | 0.1 |
| 250 | 0.25 |
| 500 | 0.5 |
| 1,000 | 1 |
Density Converter examples
The Density Converter gives these results for the most common density unit pairs.
| Input | Expected result |
|---|---|
| 1 Grams per cubic centimetre (g/cm³) → Kilograms per cubic metre (kg/m³) | 1,000 Kilograms per cubic metre (kg/m³) |
| 1 Kilograms per litre (kg/L) → Grams per cubic centimetre (g/cm³) | 1 Grams per cubic centimetre (g/cm³) |
| 1 Pounds per cubic foot (lb/ft³) → Kilograms per cubic metre (kg/m³) | 16.01846337 Kilograms per cubic metre (kg/m³) |
Supported units & limits
Supports Kilograms per cubic metre (kg/m³), Grams per cubic centimetre (g/cm³), Kilograms per litre (kg/L), Grams per litre (g/L), Pounds per cubic foot (lb/ft³), Pounds per US liquid gallon (lb/US gal). Enter zero or a positive decimal. Values use floating-point arithmetic and up to 10 displayed significant digits. The Density Converter needs a measured or published density; it does not hold a table of materials.
Common mistakes
The converter changes units, not temperature or pressure. Do not assume every liquid has the density of water. Water near 4 °C is about 1,000 kg/m³, so a liquid result in the Density Converter far from that range usually means a unit slip.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Working with density units
Density equals mass divided by volume. One g/cm³ equals 1,000 kg/m³; one g/L equals one kg/m³. The converter changes units, not temperature or pressure. Do not assume every liquid has the density of water. Keep the original measurement conditions and unit labels with your result.
Density Converter FAQ
Can this calculate a material’s density from its name?
No. Enter a known density for the relevant temperature and pressure. The converter does not look up material properties.
How does this density converter calculate the result?
It multiplies by the source unit’s factor in kilograms per cubic metre, then divides by the destination unit’s factor. The displayed result is rounded only at the end.