Unit Converter
Pressure Converter
Convert pressure units while keeping the same gauge or absolute reference.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Bar | Pounds-force per square inch (psi) |
|---|---|
| 1 | 14.50377377 |
| 2 | 29.00754755 |
| 5 | 72.51886887 |
| 10 | 145.0377377 |
| 20 | 290.0754755 |
| 50 | 725.1886887 |
| 100 | 1,450.377377 |
| 250 | 3,625.943443 |
| 500 | 7,251.886887 |
| 1,000 | 14,503.77377 |
| Pounds-force per square inch (psi) | Bar |
|---|---|
| 1 | 0.06894757293 |
| 2 | 0.1378951459 |
| 5 | 0.3447378647 |
| 10 | 0.6894757293 |
| 20 | 1.378951459 |
| 50 | 3.447378647 |
| 100 | 6.894757293 |
| 250 | 17.23689323 |
| 500 | 34.47378647 |
| 1,000 | 68.94757293 |
Pressure Converter examples
This converter gives these results for tyre, weather and vacuum pressure units.
| Input | Expected result |
|---|---|
| 1 bar → psi | 14.50377377 psi |
| 1 standard atmosphere → kilopascals | 101.325 kPa |
| 760 Torr → standard atmospheres | 1 atm |
Supported units & limits
Supports Pa, hPa, kPa, MPa, bar, mbar, atm, psi and Torr. Signed values are allowed for gauge pressure or pressure differences. The converter changes units only; it does not switch gauge pressure to absolute pressure. Water and mercury columns are handled elsewhere; this converter covers the common SI, metric and imperial units.
Common mistakes
Gauge and absolute pressure have different zero references. Do not add an atmospheric offset unless you are intentionally changing the reference and know the local atmospheric pressure. Torr and conventional mmHg are close but not exactly identical.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics (through Google Tag Manager) to count page visits, and Microsoft Clarity to see how pages are used, such as clicks and scrolling; both may set cookies, and Clarity is set to mask text on the page. The hosting server may keep standard access logs when you load a page.
Conversion guide
Keep the pressure reference consistent
Before converting, check whether a measurement is absolute, gauge or differential pressure. A tyre gauge usually measures relative to the surrounding air. A unit factor alone does not change that reference. Keep a note of the reference beside the converted number. Tyre pressure gauges read gauge pressure, so keep the result from this converter as gauge as well.
Pressure Converter FAQ
How many psi are in one bar?
One bar is approximately 14.50377377 psi. A pressure difference of one bar uses the same unit factor.
Will this convert psig to psia?
No. Unit conversion preserves your input reference. Converting gauge to absolute pressure also requires adding atmospheric pressure for the relevant conditions.