Unit Converter
Wheel RPM to MPH Converter
Convert wheel revolutions per minute to vehicle speed in mph, km/h and m/s from the tyre size, or the other way round.
Wheel RPM to MPH Converter examples
| Input | Expected result |
|---|---|
| 800 wheel rpm, 205/55R16 | 59.2 mph · 95.3 km/h |
| 60 mph, 205/55R16 | 810.7 wheel rpm |
| 1,000 wheel rpm, 31x10.50R15 | 92.2 mph · 148.4 km/h |
Supported units & limits
This converts the speed of the wheel itself, which is the rpm at the wheel, not the engine. Wheel rpm must be greater than 0 and at most 1,000,000, speed greater than 0, and tyre sizes are metric (100–500 mm wide) or inch flotation sizes. The tyre uses its nominal unloaded circumference from the size code, so real speed differs with load, wear, pressure and slip, and the speedometer may be calibrated differently. Transfer cases, overdrive and torque converter slip are not modelled. Results use floating-point arithmetic and the selected precision.
Common mistakes
Do not confuse wheel rpm with engine rpm: the engine turns several times faster, set by the gear and final drive ratios. Wheel diameter is not rim diameter. A bigger tyre travels farther per turn, so the same wheel rpm means a higher speed. Speedometers often read a little high, so a measured road speed can differ from the nominal figure. Engine rpm is not wheel rpm; divide by the overall gear ratio first, or use the RPM to vehicle speed page instead of the Wheel RPM to MPH Converter.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Start from the wheel, then add the drivetrain
Enter the tyre size, then either the wheel rpm to get the speed or a speed to get the wheel rpm. To relate it to the engine, divide the engine rpm by the gear ratio and final drive ratio, as the engine rpm tool does. Check the result against a GPS speed, since speedometers and tyres vary.
Wheel RPM to MPH Converter FAQ
How do I convert wheel rpm to mph?
Multiply the wheel rpm by the tyre circumference in metres, then multiply by 60 to get metres per hour and divide by 1,609.344 for miles per hour. For 205/55R16 at 800 rpm that is 800 × 1.985 × 60 ÷ 1,609.344 = 59.2 mph.
What is the difference between wheel rpm and engine rpm?
Wheel rpm is how fast the tyre turns. Engine rpm is higher by the transmission and final drive ratios, so 3,000 engine rpm in a gear with a total ratio of 3.73 is about 804 wheel rpm. Use the engine rpm tool for that.
Does a larger tyre change the answer?
Yes. A larger overall diameter means a longer circumference, so the same wheel rpm gives a higher speed. Enter the tyre size you actually have fitted.