Unit Converter
Tire Size to Circumference Converter
Find a tyre’s circumference from its size code, with wheel revolutions per kilometre and mile and the speed at 1,000 rpm.
Tire Size to Circumference Converter examples
| Input | Expected result |
|---|---|
| 205/55R16 | 1,985.2 mm · 503.7 revs/km · 810.7 revs/mile |
| 225/45R17 | 1,992.7 mm · 501.8 revs/km |
| 205/55R16 at 1,000 wheel rpm | 119.1 km/h (74.0 mph) |
Supported units & limits
Accepts metric sizes with an optional P or LT prefix and inch flotation sizes. Metric widths are 100 to 500 mm, aspect ratios 10 to 100 % and rims 8 to 30 inches. The circumference is the nominal unloaded value. A loaded, worn or under-inflated tyre rolls a shorter distance, and actual roll-out is commonly measured on the road. The tool does not model slip, load index, speedometer calibration or gearing.
Common mistakes
The rolling circumference is smaller than π × the nominal diameter on a loaded tyre, so odometers and bike-style roll-out tests can differ by a percent or two. Do not use the rim diameter for the circumference. Wheel revolutions per mile are not engine revolutions: gearing is separate. A larger diameter tyre covers more ground per turn, so the speedometer reads lower than your true speed.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Use circumference for gearing and speedometer checks
Enter the size from the sidewall and read the circumference and revolutions. Compare two sizes by circumference to see how much the speedometer will change, and use the speed at 1,000 rpm as a starting point for gearing calculations. For an accurate figure, measure the distance your vehicle rolls in one wheel turn. Speedometer and odometer calibration uses revolutions per mile, which the Tire Size to Circumference Converter gives for each size.
Tire Size to Circumference Converter FAQ
How do I find a tyre’s circumference?
Work out the overall diameter from the size code and multiply by π. For 205/55R16 the diameter is 631.9 mm, so the circumference is about 1,985 mm.
How many revolutions per mile does a tyre make?
Divide 1,609,344 mm by the circumference in millimetres. A 205/55R16 makes about 811 revolutions per mile. This is the nominal figure; a real tyre makes more because it is compressed under load.
Why show the speed at 1,000 rpm?
It links the tyre to gearing. Combined with the wheel rpm from the final drive and gear ratio, it lets you estimate vehicle speed, as on the related gear and RPM pages.