← Sound, Light & Space

Unit Converter

Pa to dB SPL Converter

Convert an rms sound pressure in pascals to a sound pressure level in dB SPL, with the right reference for air or water.

Convert pressure to dB SPL

Result—

rms pressure and free field. The level is relative to the reference pressure shown.

Your calculation stays in your browser.

Pa to dB SPL Converter examples

InputExpected result
1 Pa, air93.98 dB SPL re 20 µPa
1 Pa, water120 dB re 1 µPa
20 µPa, air0 dB SPL (threshold of hearing near 1 kHz)

Supported units & limits

Pressure must be greater than 0 and at most 10¹⁵ Pa, because the logarithm of zero is not defined. The pressure is taken as an rms value in a free field. The two references offered are 20 µPa for air and 1 µPa for water, and a level in another medium needs its own reference. The tool does not apply frequency weighting such as dBA, add levels from several sources, or include the effect of distance. Results use floating-point arithmetic and rounding follows the chosen precision.

Common mistakes

A level in dB SPL is meaningless without its reference: 94 dB SPL re 20 µPa is not the same pressure as 94 dB re 1 µPa. Use rms and not peak pressure, which is 1.414 times larger for a sine wave. Do not add decibels directly: two equal sources add 3 dB. 94 dB SPL is a handy calibrator level and equals 1 Pa (1.0024 Pa). Hydrophone readings use 1 µPa, so choose water in the Pa to dB SPL Converter before comparing them with in-air levels.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Always quote the reference

Enter the rms pressure and its unit, choose air or water, and read the level. When reporting a level, state the reference pressure with it, for example “94 dB re 20 µPa”.

Pa to dB SPL Converter FAQ

How do I convert Pa to dB SPL?

Divide the rms pressure by the reference (20 µPa in air), take the base-10 logarithm and multiply by 20. For 1 Pa that gives 93.98 dB.

Why is 1 Pa 94 dB?

Because 20 × log₁₀(1 ÷ 0.00002) = 93.98 dB, which is rounded to 94 dB. Acoustic calibrators commonly produce 94 dB, equal to 1 Pa.

Why do underwater levels use 1 µPa?

By convention, so underwater levels are quoted in dB re 1 µPa. The same pressure is 26 dB higher in that scale than in the air scale.