← Vehicles & Travel

Unit Converter

Tire Size to Diameter Converter

Find a tyre’s overall diameter, sidewall height and circumference from its size code.

Convert a tyre size to dimensions

Result—

Nominal unloaded dimensions from the size code. Tyre model, wear, pressure and load change real values.

Your calculation stays in your browser.

Tire Size to Diameter Converter examples

InputExpected result
205/55R16631.9 mm · 24.88 in diameter · 112.75 mm sidewall
225/45R17634.3 mm diameter
31x10.50R1531 in diameter · 8 in sidewall

Supported units & limits

Accepts metric sizes with an optional P or LT prefix and R, ZR, D, B or - construction marking, and inch flotation sizes. Metric widths are 100 to 500 mm, aspect ratios 10 to 100 %, and rims 8 to 30 inches; flotation diameters are 10 to 60 inches. The result is the nominal unloaded diameter. Real diameter changes with tyre model, tread wear, inflation pressure, load and rim width, and manufacturers publish measured values that can differ by a few millimetres. Load index, speed rating and the tyre’s service description are ignored.

Common mistakes

The first number in a metric size is the width, not the diameter, and the last number is the rim diameter in inches, while the width is in millimetres. The aspect ratio is a percentage of the width, not millimetres. A flotation size gives the diameter directly. Changing to a wider tyre with the same aspect ratio also makes the tyre taller, so the diameter and speedometer reading change. Off-road tyres are often labelled in inches, such as 31x10.50R15; the Tire Size to Diameter Converter reads that format directly.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Read the size from the sidewall

Look for a marking such as 205/55R16 91V on the sidewall. Enter the part up to the rim diameter. Compare two sizes by diameter when you want the speedometer and gearing to stay close to the original; a difference of a few percent is usually acceptable, but check your vehicle’s limits.

Tire Size to Diameter Converter FAQ

How do I calculate the diameter of a tyre from its size?

Multiply the width in millimetres by the aspect ratio and divide by 100 to get the sidewall, double it, and add the rim diameter converted to millimetres (rim inches × 25.4). For 205/55R16 that is 2 × 112.75 + 406.4 = 631.9 mm.

What does 31x10.50R15 mean?

A flotation size used on many light trucks. The tyre is 31 inches in overall diameter, 10.5 inches wide and fits a 15-inch rim. The diameter is stated, so only the sidewall is calculated.

Is the real tyre exactly this size?

Not exactly. The result is the nominal size. Tyre makers publish measured diameters, and wear, pressure and load change them. Use the manufacturer’s figure when you need an accurate value.