Unit Converter
Tile Quantity Converter
Estimate how many tiles and boxes cover an area, with grout joint width and a waste allowance.
Tile Quantity Converter examples
Checked results from the Tile Quantity Converter cover layouts with and without grout joints and waste.
| Input | Expected result |
|---|---|
| 100 sq ft, 12 × 12 in tile, no joint, no waste | 100 tiles |
| 100 sq ft, 12 × 12 in tile, 1/8 in joint, 10 % waste, 10 per box | 108 tiles · 11 boxes |
| 10 m², 30 × 30 cm tile, no joint, no waste | 112 tiles |
Supported units & limits
Handles a rectangular room or a measured area, with identical rectangular tiles laid in a straight grid. Areas and sizes must be greater than 0 and at most 1,000,000; the joint is 0 or more in the tile unit; waste is 0 to 100 %; tiles per box is a whole number, and 0 skips the box count. Pattern repeats, diagonal layouts, rounded or irregular tiles, borders and edge cuts are not planned. Order extra for cuts and breakage, and extra for later repairs if the tile may be discontinued. Use the tile’s actual size, which is often a little smaller than its nominal size. Diagonal and herringbone layouts produce more cut-offs, so raise the waste in the Tile Quantity Converter for them.
Common mistakes
Forgetting grout joints leaves you slightly short on large jobs. Nominal tile sizes differ from actual sizes, so use the measured size in the box. Diagonal layouts and patterns need more waste than a straight grid. Boxes are often sold by area, not tile count, so check the coverage per box. Area to cover should exclude fixed items such as a bathtub but include cuts around them. Buy all boxes from the same batch; colour can vary between batches, whatever the Tile Quantity Converter counts.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Measure the area, then check box coverage
Enter the room or the area, the actual tile size and the planned joint width. Choose a waste allowance for your layout, and the tiles per box if the supplier sells by the box. Compare the number of boxes with the box coverage on the label, since coverage is often stated as an area and may include allowances. Keep one spare box for repairs on top of the quantity from the Tile Quantity Converter.
Tile Quantity Converter FAQ
How many tiles do I need for a floor?
Divide the area by the area of one tile plus its joint, add a waste allowance and round up. For 100 square feet of 12 × 12 inch tiles, that is 100 tiles with no joint or waste, and 108 with a 1/8 inch joint and 10 percent waste.
How much waste should I add for tile?
A common allowance is 10 percent for straight layouts and 15 percent or more for diagonal or patterned layouts and small rooms. Check with your installer and keep a few spare tiles.
Do I include the grout joint?
Yes. Each tile covers its own size plus half of each neighbouring joint, so the joint width adds to each tile dimension. Enter 0 if the tiles are rectified and butted tight.