Unit Converter
Square Feet to Linear Feet Converter
Turn an area into the length of boards, trim or flooring of a known width, with waste and whole pieces.
Square Feet to Linear Feet Converter examples
| Input | Expected result |
|---|---|
| 100 sq ft with 12-inch wide boards | 100 linear feet |
| 100 sq ft with 5.5-inch wide boards | 218.18 linear feet |
| 100 sq ft, 5.5-inch boards, 10 % waste, 12 ft pieces | 240 ft to buy · 20 pieces |
Supported units & limits
Area and width must be greater than 0 and at most 1,000,000,000 in their units; waste is 0 to 100 %; piece length is 0 or more, with 0 meaning no piece count. Width is the exposed or covering width of one board, not the nominal board width. The tool treats the area as a rectangle covered by straight pieces. It does not account for overlap, tongue-and-groove coverage, gaps, pattern matching, cut layout or the length of leftover offcuts.
Common mistakes
Square feet cannot be converted to linear feet without a width. A 100 sq ft floor is 100 linear feet of 12-inch wide boards, but 200 linear feet of 6-inch boards. Use the covering width, which is often smaller than the board width because of tongue-and-groove edges. Do not mix inches and feet: 5.5 inches is 0.4583 feet.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Use the covering width and add waste
Measure the area to cover, find the covering width of the product from its label or data sheet, and add a waste allowance for cuts and defects. Enter the usual piece length to get a count, then compare with the supplier’s bundle size. Remember that layout, patterns and the room shape can change how much you need.
Square Feet to Linear Feet Converter FAQ
How do I convert square feet to linear feet?
Divide the area in square feet by the width in feet. For 5.5-inch boards, divide by 5.5 ÷ 12 = 0.4583 feet. A narrower board needs more linear feet to cover the same area.
Which width should I enter for tongue-and-groove boards?
Use the covering width after the tongue and groove overlap, which the manufacturer lists. It is smaller than the board’s overall width.
Does the piece count include waste?
Yes. The tool adds the waste percentage first, divides by the piece length and rounds up to a whole piece. Check the supplier’s pack sizes, because boards are often sold in bundles.