← Sound, Light & Space

Unit Converter

Sound Intensity Converter

Convert sound intensity (sound power per area) between SI units, and see the intensity level in dB re 1 pW/m².

Convert sound intensity

Result—

Exact definitions are used for each unit. BTU and calorie units are International Table (IT) unless stated.

Your calculation stays in your browser.

Sound Intensity Converter examples

Below, the Sound Intensity Converter works through microwatt, watt and per-square-centimetre values.

InputExpected result
1 µW/m²60 dB re 1 pW/m² · 10⁶ pW/m²
1 W/m²120 dB · 10⁻⁴ W/cm²
1 W/cm²10,000 W/m²

Supported units & limits

Converts an intensity value, which must be 0 or more, between units. The level uses the reference of 1 pW/m² and a power quantity, so it uses 10 log. The tool does not convert between intensity and sound pressure, which depends on the medium’s density and the speed of sound and on the geometry of the sound field. It does not describe directional or reverberant fields. Results use floating-point arithmetic and rounding follows the chosen precision. The tool converts units only; it does not check that a value is physically realistic.

Common mistakes

Intensity is power per area, so it is not a sound power in watts. Intensity level uses 10 log10 because intensity is a power-like quantity, while sound pressure level uses 20 log10. An intensity level and a sound pressure level are close for a plane wave in air but are different quantities. Do not add intensities in dB directly: add the intensities, then convert. Doubling intensity adds only about 3 dB, which the Sound Intensity Converter shows if you enter twice the value.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Keep power, intensity and pressure apart

Use intensity for energy flow through an area, power for the source, and pressure for what a microphone measures. Convert between the units here, and use the level for reporting. Ultrasound and laboratory work often quote W/cm², which the Sound Intensity Converter turns into W/m² by multiplying by 10,000.

Sound Intensity Converter FAQ

How do I convert W/m² to dB?

Take 10 times the base-10 logarithm of the intensity divided by 10⁻¹² W/m². An intensity of 10⁻⁶ W/m² is 60 dB.

Why 10 log and not 20 log?

Intensity is proportional to power, and a power ratio uses 10 log10. Sound pressure is an amplitude, and its level uses 20 log10.

Is intensity the same as sound power?

No. Sound power is the total acoustic power of a source in watts. Intensity is that power passing through one square metre.