← Sound, Light & Space

Unit Converter

Power Ratio to dB Converter

Convert a power or intensity ratio to decibels using 10 log₁₀, and back.

Convert a power ratio and decibels

Result—

Decibels are logarithmic. Do not add levels without converting them back to ratios.

Your calculation stays in your browser.

Power Ratio to dB Converter examples

InputExpected result
Power ratio of 23.01 dB · amplitude ratio 1.414
Power ratio of 1010 dB
3 dBpower ratio 1.995 · amplitude ratio 1.413

Supported units & limits

Ratios must be greater than 0 and at most 10¹⁵, because the logarithm of zero or a negative number is undefined. Decibel values from −3,000 to 3,000 are accepted and may be negative. The tool handles power (energy-like) quantities: for pressure, voltage or current use the sound pressure ratio tool, which uses 20 log. It does not convert to an absolute level, which needs a reference such as 1 mW or 1 W. Results use floating-point arithmetic and rounding follows the chosen precision.

Common mistakes

Using 20 log for a power ratio gives twice the right number of decibels. Doubling the power is 3 dB, not 6 dB. 3 dB is almost exactly a factor of two in power but 1.41 in amplitude. A negative decibel value is a loss, a ratio below 1. Decibels describe a ratio, not an absolute power, unless a reference is stated.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Match the formula to the quantity

Use this for power, intensity and gain or loss in systems. Add decibel gains and losses along a chain, then convert the total back to a ratio if needed.

Power Ratio to dB Converter FAQ

How many dB is double the power?

About 3.01 dB. Ten times the power is 10 dB, and a hundred times is 20 dB.

Why is a power ratio 10 log?

Because decibels are defined so that a ratio of 10 in power is 10 dB, and amplitude is proportional to the square root of power, which gives 20 log for amplitude.

What does a negative dB mean?

A ratio below 1, such as a loss. −3 dB is about half the power.