Unit Converter
Magnetic Flux Converter
Convert magnetic flux measurements instantly, with explicit units and calculation details.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Webers (Wb) | Maxwells (Mx) |
|---|---|
| 1 | 100,000,000 |
| 2 | 200,000,000 |
| 5 | 500,000,000 |
| 10 | 1,000,000,000 |
| 20 | 2,000,000,000 |
| 50 | 5,000,000,000 |
| 100 | 10,000,000,000 |
| 250 | 25,000,000,000 |
| 500 | 50,000,000,000 |
| 1,000 | 100,000,000,000 |
| Maxwells (Mx) | Webers (Wb) |
|---|---|
| 1 | 0.00000001 |
| 2 | 0.00000002 |
| 5 | 0.00000005 |
| 10 | 0.0000001 |
| 20 | 0.0000002 |
| 50 | 0.0000005 |
| 100 | 0.000001 |
| 250 | 0.0000025 |
| 500 | 0.000005 |
| 1,000 | 0.00001 |
Magnetic Flux Converter examples
| Input | Expected result |
|---|---|
| 1 Webers (Wb) → Maxwells (Mx) | 100,000,000 Maxwells (Mx) |
| 1 Milliwebers (mWb) → Microwebers (µWb) | 1,000 Microwebers (µWb) |
| 1 Volt-seconds (V·s) → Webers (Wb) | 1 Webers (Wb) |
Supported units & limits
Supports Webers (Wb), Milliwebers (mWb), Microwebers (µWb), Maxwells (Mx), Volt-seconds (V·s). Signed readings or changes are accepted. Values use floating-point arithmetic and up to 10 displayed significant digits.
Common mistakes
Flux measures the field through a surface, while flux density is per area. Coil flux linkage additionally accounts for the number of turns.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Working with magnetic flux units
One maxwell is 10⁻⁸ weber. A volt-second is another expression of the weber. Flux measures the field through a surface, while flux density is per area. Coil flux linkage additionally accounts for the number of turns. Keep the original measurement conditions and unit labels with your result.
Magnetic Flux Converter FAQ
Can I convert webers directly to teslas?
You need the relevant area and field geometry. For a uniform perpendicular field, flux equals flux density multiplied by area.
How does this magnetic flux converter calculate the result?
It multiplies by the source unit’s factor in webers, then divides by the destination unit’s factor. The displayed result is rounded only at the end.