Unit Converter
Inductance Converter
Convert inductance measurements instantly, with explicit units and calculation details.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Millihenries (mH) | Microhenries (µH) |
|---|---|
| 1 | 1,000 |
| 2 | 2,000 |
| 5 | 5,000 |
| 10 | 10,000 |
| 20 | 20,000 |
| 50 | 50,000 |
| 100 | 100,000 |
| 250 | 250,000 |
| 500 | 500,000 |
| 1,000 | 1,000,000 |
| Microhenries (µH) | Millihenries (mH) |
|---|---|
| 1 | 0.001 |
| 2 | 0.002 |
| 5 | 0.005 |
| 10 | 0.01 |
| 20 | 0.02 |
| 50 | 0.05 |
| 100 | 0.1 |
| 250 | 0.25 |
| 500 | 0.5 |
| 1,000 | 1 |
Inductance Converter examples
| Input | Expected result |
|---|---|
| 1 Millihenries (mH) → Microhenries (µH) | 1,000 Microhenries (µH) |
| 1 Henries (H) → Millihenries (mH) | 1,000 Millihenries (mH) |
| 1 Microhenries (µH) → Nanohenries (nH) | 1,000 Nanohenries (nH) |
Supported units & limits
Supports Henries (H), Millihenries (mH), Microhenries (µH), Nanohenries (nH). Enter zero or a positive decimal. Values use floating-point arithmetic and up to 10 displayed significant digits.
Common mistakes
Inductance is not inductive reactance. Converting it to ohms at a frequency requires a separate calculation and a component model. Inductor datasheets often state the value at a test frequency and current; the Inductance Converter only changes the unit of that value.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Working with inductance units
Inductance prefixes scale the henry. One henry corresponds to one weber of flux linkage per ampere. Inductance is not inductive reactance. Converting it to ohms at a frequency requires a separate calculation and a component model. Keep the original measurement conditions and unit labels with your result.
Inductance Converter FAQ
Does inductance depend on the measurement conditions?
The unit factor is fixed, but a measured component value may depend on frequency, core conditions and current.
How does this inductance converter calculate the result?
It multiplies by the source unit’s factor in henries, then divides by the destination unit’s factor. The displayed result is rounded only at the end.