← Electricity & Magnetism

Unit Converter

Magnetic Field Strength Converter

Convert magnetic field strength measurements instantly, with explicit units and calculation details.

Choose your units

Result—

Results show up to 10 significant digits. Rounding can affect the final displayed digit.

Your calculation stays in your browser.

Quick conversion table

Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.

Oersteds (Oe) → Amperes per metre (A/m)
Oersteds (Oe)Amperes per metre (A/m)
179.57747155
2159.1549431
5397.8873577
10795.7747155
201,591.549431
503,978.873577
1007,957.747155
25019,894.36789
50039,788.73577
1,00079,577.47155
Amperes per metre (A/m) → Oersteds (Oe)
Amperes per metre (A/m)Oersteds (Oe)
10.01256637061
20.02513274123
50.06283185307
100.1256637061
200.2513274123
500.6283185307
1001.256637061
2503.141592654
5006.283185307
1,00012.56637061

Magnetic Field Strength Converter examples

InputExpected result
1 Oersteds (Oe) → Amperes per metre (A/m)79.57747155 Amperes per metre (A/m)
1 Amperes per centimetre (A/cm) → Amperes per metre (A/m)100 Amperes per metre (A/m)
1 Kiloamperes per metre (kA/m) → Amperes per metre (A/m)1,000 Amperes per metre (A/m)

Supported units & limits

Supports Amperes per metre (A/m), Kiloamperes per metre (kA/m), Amperes per centimetre (A/cm), Oersteds (Oe). Signed readings or changes are accepted. Values use floating-point arithmetic and up to 10 displayed significant digits.

Common mistakes

H is not flux density B. Do not assume a vacuum relationship applies inside every magnetic material.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Working with magnetic field strength units

The field-strength quantity H uses A/m. One oersted corresponds to 1,000/(4π) A/m under the conventional CGS-to-SI unit relationship. H is not flux density B. Do not assume a vacuum relationship applies inside every magnetic material. Keep the original measurement conditions and unit labels with your result.

Magnetic Field Strength Converter FAQ

Why are gauss and tesla not listed here?

They measure magnetic flux density B. Use the Magnetic Field converter to change between gauss and tesla.

How does this magnetic field strength converter calculate the result?

It multiplies by the source unit’s factor in amperes per metre, then divides by the destination unit’s factor. The displayed result is rounded only at the end.