Unit Converter
Gravel Tons to Cubic Yards Converter
Convert tons of gravel, crushed stone or sand to cubic yards and back, with the density range and the area covered.
Gravel Tons to Cubic Yards Converter examples
| Input | Expected result |
|---|---|
| 10 short tons of gravel at the middle density (1.55 tons per yd³) | 6.45 yd³ (5.88 to 7.14 over the range) |
| 9 cubic yards of gravel | 13.95 short tons (12.6 to 15.3) |
| 10 short tons of gravel spread 4 inches deep | 6.45 yd³ covers 523 sq ft |
Supported units & limits
Presets are typical ranges for loose material from one published density table, not guarantees, and the table does not say whether its tons are short tons (its pounds-per-cubic-foot column fits 2,000 lb tons), and the true density depends on stone type, size grading, moisture and compaction. For an accurate order use your supplier’s figure through the custom density option, in short tons per cubic yard, pounds per cubic foot or kilograms per cubic metre. Amounts must be greater than 0 and at most 1,000,000,000; depth is optional in inches. The tool does not apply compaction or shrink factors, and does not estimate delivery truck loads or add waste.
Common mistakes
Without a density, tons and cubic yards cannot be converted. A cubic yard of gravel weighs roughly 1.4 to 1.7 tons, not a ton. Wet material is heavier than dry, and compacted material takes less volume than loose material. Tons can mean short, long or metric, which differ by about 10 %. Order extra for compaction and uneven ground. Suppliers quote different densities for washed stone and road base; use their figure in the Gravel Tons to Cubic Yards Converter when you have it.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Use the supplier’s density when ordering
For an estimate, choose the material and read the typical value and range. For an order, ask the supplier for tons per cubic yard of the exact product, enter it as a custom density and add an allowance for compaction and uneven ground. Enter the depth to see how much area the volume covers.
Gravel Tons to Cubic Yards Converter FAQ
How many tons are in a cubic yard of gravel?
About 1.4 to 1.7 tons, or roughly 2,800 to 3,400 pounds. The tool uses 1.55 as the typical value and shows the range. Ask your supplier for the exact figure for your product.
Why does the answer show a range?
Gravel density varies with stone type, grading and moisture. A range is more honest than a single number, so the tool gives the typical value together with the cubic yards at the highest and lowest densities.
How do I use my supplier’s weight per yard?
Choose the custom density option, enter their figure and its unit, and the range collapses to that single density. Use it whenever you can, since it is the number your supplier will bill with.