Unit Converter
Torque Converter
Convert torque measurements instantly, with explicit units and calculation details.
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Pound-force feet (lbf·ft) | Newton-metres (N·m) |
|---|---|
| 1 | 1.355817948 |
| 2 | 2.711635897 |
| 5 | 6.779089742 |
| 10 | 13.55817948 |
| 20 | 27.11635897 |
| 50 | 67.79089742 |
| 100 | 135.5817948 |
| 250 | 338.9544871 |
| 500 | 677.9089742 |
| 1,000 | 1,355.817948 |
| Newton-metres (N·m) | Pound-force feet (lbf·ft) |
|---|---|
| 1 | 0.7375621493 |
| 2 | 1.475124299 |
| 5 | 3.687810746 |
| 10 | 7.375621493 |
| 20 | 14.75124299 |
| 50 | 36.87810746 |
| 100 | 73.75621493 |
| 250 | 184.3905373 |
| 500 | 368.7810746 |
| 1,000 | 737.5621493 |
Torque Converter examples
Below, the Torque Converter works through the torque units found on wrenches and engine data sheets.
| Input | Expected result |
|---|---|
| 1 Pound-force feet (lbf·ft) → Newton-metres (N·m) | 1.355817948 Newton-metres (N·m) |
| 12 Pound-force inches (lbf·in) → Pound-force feet (lbf·ft) | 1 Pound-force feet (lbf·ft) |
| 1 Kilogram-force metres (kgf·m) → Newton-metres (N·m) | 9.80665 Newton-metres (N·m) |
Supported units & limits
Supports Newton-metres (N·m), Kilonewton-metres (kN·m), Kilogram-force metres (kgf·m), Pound-force feet (lbf·ft), Pound-force inches (lbf·in), Dyne-centimetres (dyn·cm). Signed readings or changes are accepted. Values use floating-point arithmetic and up to 10 displayed significant digits.
Common mistakes
Torque and energy share dimensions but describe different quantities. Do not label a torque reading as joules. Smaller torque wrenches often read lbf·in; check the scale before you enter the number in the Torque Converter.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Working with torque units
Torque factors multiply the force factor by the perpendicular lever-arm length factor. A pound-force foot is approximately 1.355817948 N·m. Torque and energy share dimensions but describe different quantities. Do not label a torque reading as joules. Keep the original measurement conditions and unit labels with your result.
Torque Converter FAQ
How do pound-force feet relate to pound-force inches?
One pound-force foot equals 12 pound-force inches because one foot is 12 inches.
How does this torque converter calculate the result?
It multiplies by the source unit’s factor in newton-metres, then divides by the destination unit’s factor. The displayed result is rounded only at the end.