← Cooking & Home Projects

Unit Converter

Lumber Dimensions Converter

Convert nominal lumber sizes such as 2 × 4 to their actual dressed dimensions, or identify the nominal size from a measurement.

Convert lumber dimensions

Result—

Dressed dry softwood sizes under the American Softwood Lumber Standard. Green, rough, timber and hardwood sizes differ.

Your calculation stays in your browser.

Lumber Dimensions Converter examples

Use these rows to compare your own Lumber Dimensions Converter result for a 2 × 4, a 1 × 6 and a metric measurement.

InputExpected result
Nominal 2 × 41-1/2 × 3-1/2 in · 38.1 × 88.9 mm · 65.6 % of nominal area
Nominal 1 × 63/4 × 5-1/2 in
38 × 89 mmnominal 2 × 4

Supported units & limits

Covers dressed dry softwood boards (1 and 5/4) and dimension lumber (2, 3 and 4 thick) in widths 2, 3, 4, 5, 6, 8, 10, 12, 14 and 16. Green, rough-sawn and timber sizes, hardwoods, engineered lumber, and sizes sold in other countries differ and are not included. Measurements are matched to a nominal size within 1/32 inch (about 0.8 mm), and anything further away is reported as no match. Real boards vary with moisture and milling, so measure before cutting joints. The tool uses a published standard whose current edition was not checked against a primary document. Pressure-treated or green lumber can be slightly larger than the dry sizes in the Lumber Dimensions Converter.

Common mistakes

A 2 × 4 is not 2 by 4 inches. The cut and dried board shrinks to 1-1/2 by 3-1/2. Pricing by nominal board feet uses the larger nominal size, but the board you get is smaller. Hardwood is usually sold in quarters of an inch, not in these softwood sizes. Metric lumber such as 38 × 89 mm matches the same dressed 2 × 4 size, but its labels differ by country. Do not assume rough lumber or pressure-treated wet lumber has the dry dimensions.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Use nominal sizes to buy and actual sizes to build

When planning framing, use the actual dimensions for the fit of joints, spacing and clearances, and the nominal sizes to match the names on the price list. Measure boards when you buy them, because moisture and mills vary, and treated or green lumber can be larger. For metric projects, check whether the supplier labels 38 × 89 mm. When framing, add up actual thicknesses from the Lumber Dimensions Converter: three 2 × 4s side by side are 4-1/2 inches, not 6.

Lumber Dimensions Converter FAQ

What is the actual size of a 2 × 4?

For dry softwood lumber it is 1-1/2 by 3-1/2 inches, or 38.1 by 88.9 millimetres. Boards labelled 38 × 89 mm are the same size rounded.

Why is lumber smaller than its name?

The nominal name describes the rough board before drying and planing. Drying shrinks it and surfacing removes more, so the finished board is smaller. The sizes are set by the softwood lumber standard.

Do board feet use nominal or actual size?

Lumber is generally priced by nominal board feet, while the actual volume is smaller. This tool shows both per linear foot so you can compare what you pay for with what you get.