← Vehicles & Travel

Unit Converter

Jet Fuel Liters to Kilograms Converter

Estimate Jet A/A-1 fuel mass from liters using the FAA standard weight at 59 °F.

Convert Jet A/A-1 volume to mass

Result—

Estimate uses the FAA Jet A/A-1 standard weight at 59 °F; actual fuel mass varies with density and temperature.

Your calculation stays in your browser.

Jet Fuel Liters to Kilograms Converter examples

InputExpected result
1 L Jet A/A-1about 0.80044 kg
100 L Jet A/A-1about 80.044 kg
1 U.S. gallon (3.785411784 L)6.68 lb (about 3.03 kg)

Supported units & limits

Enter a non-negative fuel volume in litres. The estimate assumes Jet A/A-1 at the FAA standard reference temperature of 59 °F. Actual density varies with batch and temperature. Use measured fuel density and aircraft-approved procedures for operational calculations.

Common mistakes

Litres measure volume, while kilograms measure mass. This conversion depends on a fuel-density assumption. Do not apply the Jet A/A-1 estimate to avgas or another fuel, and do not treat it as a measured fuel mass or aircraft loading result.

Privacy

Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.

Conversion guide

Estimate Jet A/A-1 mass from litres

Enter litres to estimate kilograms and pounds using the FAA 59 °F standard fuel weight.

Jet Fuel Liters to Kilograms Converter FAQ

How many kilograms are in a litre of Jet A?

Using the FAA 59 °F standard weight of 6.68 lb per U.S. gallon, the derived value is about 0.80044 kg per litre.

Does the conversion apply to avgas?

No. This page is specifically for Jet A/A-1. Avgas has a different standard weight and density.

Why is 59 °F specified?

Fuel density changes with temperature. The FAA handbook provides different standard fuel weights at 32 °F and 59 °F; this page uses the 59 °F value.

Can I use this result for aircraft weight and balance?

Use actual fuel data and the aircraft’s approved documentation and procedures. This general density estimate does not replace aircraft-specific weight-and-balance calculations.