Unit Converter
Frequency Converter
Convert frequency between hertz, kilohertz, megahertz, gigahertz and revolutions per minute (rpm).
Quick conversion table
Common values in both directions, calculated with the same definitions as the converter above and shown to up to 10 significant digits.
| Hertz (Hz) | Revolutions per minute (rpm) |
|---|---|
| 1 | 60 |
| 2 | 120 |
| 5 | 300 |
| 10 | 600 |
| 20 | 1,200 |
| 50 | 3,000 |
| 100 | 6,000 |
| 250 | 15,000 |
| 500 | 30,000 |
| 1,000 | 60,000 |
| Revolutions per minute (rpm) | Hertz (Hz) |
|---|---|
| 1 | 0.01666666667 |
| 2 | 0.03333333333 |
| 5 | 0.08333333333 |
| 10 | 0.1666666667 |
| 20 | 0.3333333333 |
| 50 | 0.8333333333 |
| 100 | 1.666666667 |
| 250 | 4.166666667 |
| 500 | 8.333333333 |
| 1,000 | 16.66666667 |
Frequency Converter examples
These worked cases run hertz prefixes and rotation in rpm through the Frequency Converter.
| Input | Expected result |
|---|---|
| 60 revolutions per minute → hertz | 1 Hz |
| 1 megahertz → kilohertz | 1,000 kHz |
| 50 hertz → revolutions per minute | 3,000 rpm |
Supported units & limits
Supports Hz, kHz, MHz, GHz and RPM. Enter a nonnegative frequency. RPM conversions treat one revolution as one cycle. Angular frequency in radians per second and period in seconds are not supported. Angular frequency ω = 2πf is not part of the Frequency Converter; use the angular velocity tool for rad/s.
Common mistakes
Frequency in hertz is not angular frequency in radians per second; the latter includes a factor of 2π. Motor electrical frequency and shaft RPM also depend on pole count and slip, so do not equate them directly.
Privacy
Conversions run in your browser. This site does not upload or store the values you enter. We use Google Analytics, loaded through Google Tag Manager, to count page visits and see which tools are used; Google may set cookies for this. The hosting server may keep standard access logs when you load a page.
Conversion guide
Cycles, rotations and angular frequency
Hertz counts cycles per second, while RPM counts revolutions per minute. A rotation can be treated as a cycle when those describe the same repeated motion. Angular frequency instead measures radians per second. Keep these quantities distinct when interpreting sensors, motors and signal data.
Frequency Converter FAQ
How do I convert Hz to RPM?
For one revolution per cycle, multiply Hz by 60. This describes rotational frequency and is not a complete calculation of motor shaft speed from electrical supply frequency.
Can this calculate the period of a signal?
The period is the reciprocal of frequency: T = 1/f when f is in hertz. That operation is different from changing frequency units and is not performed by this tool.